Real glass lenses
CHORS® uses real glass lenses for all its spotlights without exception. These are manufactured in such a way that the light is projected without a yellowish colour fringe, creating a smooth transition from light to dark.
Beam angle
CHORS® uses real glass lenses with beam angles of 80°, 60°, 50° and 40° for its spotlights. Power loss is approximately 8 per cent and chromatic aberration is extremely low, thereby preventing colour distortion.
Zoom
In many CHORS® spotlights, the real glass lenses are mounted on movable bearings and can be adjusted by turning, allowing the beam angle to be continuously adjusted between 15° and 40° or between 15° and 60°.
Left-hand thread
The real glass lenses can be adjusted without tools by turning the lens via the left-hand thread on the glass lens mount; no tools, no dismantling, simply from the front.
SOFT diffuser
CHORS® offers three diffusers for its panel lights, one of which is the SOFT diffuser with a beam angle greater than 90°, an opal surface and a power loss of 30%.
SPR Diffuser
The SPR diffuser is a semi-opaque prismatic diffuser with a power loss of 10 per cent. The beam angle is 60 degrees and it complies with workplace regulations (UGR19).
PR Diffuser
The PR diffuser has a power loss of 8 per cent, emits light at a 60° angle and complies with workplace regulations (UGR19). The prisms cause visible ring patterns to form around each individual LED.
Dimmer
The dimmer developed by CHORS® uses flash memory to retain the last brightness setting even when the power is off, which is ideal for card-operated switches in hotels or for switching off the mains in the bedroom.
Adjustment
Most CHORS® spotlights feature a swivelling and tilting lamp head, which allows for adjustment within specified limits, thereby providing flexibility.
Screwless
A large proportion of CHORS® spotlights and luminaires can be installed without visible screws. Bayonet systems or coarse-threaded connections usually make it possible to install them without visible screws.
KAISER® flush-mounted box
Numerous luminaires can be fitted directly onto KAISER® or other manufacturers’ installation boxes, as they are designed to accommodate the 60 mm centre-to-centre drilling distance and can utilise the boxes’ screw domes.
Drivers
CHORS® incorporates drivers from leading European manufacturers into its luminaires and offers them for recessed spotlights in TRIAC, DALI® and CASAMBI® versions. This means you receive a fully coordinated solution from a single source.
Decentralised with SNAP
For CHORS®, decentralised power supply for pendant luminaires is not a special solution, but part of the standard. All pendant luminaires can be ordered without their own driver or ceiling rose and can therefore be controlled externally.
SNAP ceiling rosettes
With SNAP ceiling caps, the ZS pendant luminaires can be powered decentrally, either via integrated drivers or directly via numerous high-voltage connections. The all-round cable outlet provides great flexibility.
SNAP Deflectors
The SNAP deflectors are the perfect complement to the ZS pendant lights and SNAP ceiling roses. They help to secure the pendant lights firmly and safely in position and at the correct height, thereby creating an aesthetically pleasing arrangement.
Finishes
CHORS® offers six brushed metallic finishes, which are already available for a wide range of models. Each model is tested prior to approval and then authorised for these finishes.
Standard colours
In addition to the six metallic finishes, CHORS offers five RAL colours and 13 NCS colours as standard. Combinations of these colours are also possible.
Custom colours
For a reasonable surcharge, CHORS® can paint any custom colour from the NCS colour chart. This helps our customers to implement projects featuring unusual corporate identity colour schemes.
Painting of plastic
When painting the spotlights for track systems, CHORS® can also paint the adaptors. Plastic parts such as adaptors, end caps, etc. cannot be given a brushed finish.
Painting of extruded aluminium
CHORS® also offers to paint the busbars to match the surface finish. Here too, a brushed finish cannot be applied due to the required dimensional accuracy.
Slim System
Using its in-house SLIM SYSTEM profile system, CHORS® can combine recessed, surface-mounted and suspended profile systems featuring rotatable and swivelling spotlights with adjustable beam angles with panel lights.